As electronic manufacturing moves towards high-end and intelligent, green and low-carbon is no longer a multiple-choice question, but a must answer question.

From June 2nd to 4th, 2026, FAC TEC CHINA 2026 (Electronic Factory Facilities Exhibition) will grandly kick off at the Shanghai World Expo Exhibition and Convention Center. This professional exhibition, which originated from FAC TEX in Japan and has accumulated over 40 years of industry experience with NEPCON China, focuses on “advanced factory facilities” and gathers professional forces in high-end electronic manufacturing fields such as electronic products, semiconductors, printed circuit boards, and automotive electronics. It focuses on intelligent production, flexible manufacturing, and green factory solutions.

Shanghai Paralon New Materials Co., Ltd. will showcase its two core protective coating technologies, Parylene and UV, at booth 1C20. During the same period, Dr. Yang Yuheng, the R&D Director of the company, was invited to attend the “Energy saving and Low carbon Technology Seminar for Electronic Factories” and gave a keynote speech titled “Energy saving Applications of the New Generation Protective Coatings”. We sincerely invite you to visit our booth and forum to explore the green new path of electronic manufacturing protection technology together.

Paralon New Materials: Protecting Every Precision Circuit with Coating Technology

Under the development trend of precision, miniaturization, and high reliability in electronic manufacturing, protective coatings have long been upgraded from “icing on the cake” to “essential standard equipment”. Whether it is the insulation and moisture resistance of high-end semiconductors or the long-term reliability of automotive electronics in harsh environments, the choice of coating technology directly affects product life, yield, and even the energy consumption performance of the entire production line.

Shanghai Paralon New Materials Co., Ltd. is deeply engaged in the field of functional protective coatings and has built three major technology platforms represented by Parylene vacuum vapor deposition, UV UV curing, and ALD atomic layer deposition. We provide customers with one-stop protection solutions from material development to process customization, helping electronic manufacturing enterprises achieve the dual green goals of “reducing losses at the product end and reducing consumption at the process end”.

Parylene: The ultimate protection and “long-lasting answer” to extend the product lifecycle

Energy saving is never just about turning off a light. Extending the lifespan of a component by ten years is itself the most profound energy-saving measure.

The Parylene coating adopts a unique vacuum vapor deposition process, which uniformly adheres to the surface of the substrate at the molecular level, forming a dense protective film without pinholes, stress, and nanometer level accuracy. Its advantages are hidden in a set of real application scenarios:

Almost perfect encapsulation: Gaseous monomers are ubiquitous, forming a uniformly thick coating even on micron sized gaps, sharp edges, and irregular structures, providing comprehensive and blind spot protection for precision sensors and MEMS devices;

Excellent dielectric and moisture resistance performance: extremely low dielectric constant and dielectric loss, making it an ideal insulation layer on high-frequency circuit boards; Excellent water vapor barrier capability ensures long-term stable operation of devices in semiconductor packaging and implantable medical devices, significantly reducing maintenance and replacement costs caused by environmental failures;

Extend service and reduce waste: In applications such as automotive electronic ECU and aerospace avionics systems that require long life and high reliability, Parylene coating extends the product warranty period exponentially, reducing carbon emissions from scrap and repeated manufacturing at the source.

At Parylene, it has never been a simple coating process of “raw material processing”. We have the full chain capability from raw material purification to precise control of process parameters, and customize the most suitable deposition scheme for each product, ensuring just the right amount of protection – this itself is a form of resource conservation.

UV coating: fast curing, low energy consumption, press the green acceleration button for efficient production lines

If Parylene is a marathon runner who pursues ultimate longevity, then UV cured coatings are the “sprint champions” specially designed for efficient manufacturing.

On high-speed PCB production lines and electronic assembly lines, time is the cost, and energy consumption is the profit. The Pailalun UV coating series hits the pain points of the industry with three core advantages:

Instant curing, ultimate energy saving: Traditional thermosetting coatings require tens of minutes or even hours of high-temperature baking, with astonishing energy consumption; The UV coating can be cured in just a few seconds under UV light irradiation, reducing energy consumption by over 70%, helping factories achieve a significant reduction in carbon footprint while doubling production capacity;

Solvent free, truly green: 100% solid content formula, almost zero VOC emissions, no need for solvent recovery and exhaust gas treatment equipment, ensuring the occupational health and safety of operators, and saving expensive end of pipe treatment investment, truly achieving “green from source to end”;

High compatibility, easy implementation: Whether it’s traditional three proof coating lines or precision selective coating equipment, Pailalun UV coating can seamlessly adapt, helping customers quickly upgrade their protection solutions on the basis of existing production lines, and achieve green transformation without the need for major demolition and construction.

From server motherboards to energy storage battery management systems, from consumer electronics flexible circuits to industrial control modules, Paralon UV coating is bringing practical benefits of “faster coating, lower energy consumption, and stronger protection” to more and more electronic manufacturing enterprises.

Dr. Yang Yuheng invites you to discuss the energy-saving application of the new generation of protective coatings

During this FAC TEC CHINA, Dr. Yang Yuheng, the R&D Director of the company, will attend at the invitation of the organizers“Energy saving and low-carbon technology seminar for electronic factories”And bring theme sharing——Energy saving Application of New Generation Protective Coatings。

In this sharing, Dr. Yang will start from the two technological routes of Parylene and UV, and combine real-life cases of Parylene in industries such as consumer electronics, automotive electronics, and semiconductors to deeply analyze how protective coatings have evolved from “passive protection” to “active energy saving”? How to systematically reduce process energy consumption and lifecycle carbon emissions while ensuring reliability through material innovation? For process engineers, production managers, and procurement decision-makers who are looking for a path to green factory implementation, this will be an unmissable technical opportunity.

Meet by the banks of the Pujiang River and embark on a new chapter of protection together

During the three-day exhibition, the Paralon team will be at the Shanghai World Expo Exhibition and Convention Center1C20 boothWaiting for your arrival. We will showcase the latest samples and application cases of Parylene and UV coatings, with our technical team providing on-site Q&A and in-depth face-to-face communication after Dr. Yang Yuheng’s forum return.

Exhibition Guide

Exhibition TimeJune 2-4, 2026

exhibition venueShanghai World Expo Exhibition and Convention Center

Paralon booth：1C20

Technical Seminar:Energy saving and low-carbon technology seminar for electronic factories

Whether you are concerned about improving the reliability of moisture-proof insulation for circuit boards or optimizing the energy consumption path of production lines, welcome to 1C20 and chat with us. We have prepared hot tea and sincerity, just waiting for a deep dialogue on green manufacturing and advanced protection.

In June in Shanghai, we never see each other.